Road Signs and Markings

Road Signs

Image of road signsThe Highway Authority provides signs in order to give information to the road user.

The Highway Code (see the external links section below) gives examples of the most common signs in normal use.

Signs fall into certain groups:

  • regulatory signs - signs with red circles.

40mph speed limit sign

  • warning signs - mostly triangular.

Crossroads sign

  • direction signs - mostly rectangular. Destinations and map type.

Route confirmatory sign after junction

  • information signs - mostly rectangular.

Area in which cameras are used to enforce traffic regulations

All signs on the highway must be authorised by the Authority. Special signs are allowed with prior approval of the Department for Transport, or if they are experimental and under trial.

|Back to top

Image of road markings in Wood Green town centre

Road Markings

Road markings help us observe traffic rights and restrictions.

Yellow lines

Yellow lines are provided where there is a need to restrict parking to help alleviate traffic flow and to prevent obstructions on the highway.

There are only two types used:

  • double lines usually to mark lengths of road where there is no waiting at any time. However there are exceptions to this and supplementary plates fixed to lighting columns or posts will tell you what the actual restriction is.
  • single lines usually indicate a shorter period of restriction such as daytime. Again supplementary plates will show the actual times.

Loading restrictions are shown by yellow markings on the kerb and on the supplementary plates.

|Back to top

White lines

White lines on the road are provided to help road users by giving different types of information on lane use and directions.

Road markings are as important as signs. Longitudinal markings inform and warn road users of approaching situations that will require them to take some form of action (i.e. solid white line - do not cross, or lane line - turn right).

Transverse lines also give instruction (i.e. stop or give way).

|Back to top

Red routes

On certain main roads yellow lines indicating a parking ban have been replaced by red lines. Unlike yellow lines, single and double red lines ban all stopping, parking and loading. Double red lines apply at all times and single red lines usually apply during the working day.

There are limited exceptions to this general rule and they are indicated by signs where they apply.

Red route controls are rigorously enforced by the Police and their Traffic Wardens. They are not enforced by the Council's Civil Enforcement Officers (Parking Attendants).

For more information, please consult the Highway Code external link below.

|Back to top

Contact us

If you would like to report any problems with our road signs or markings,

See also

The following links are not part of the Haringey Council website. Please read our legal disclaimer before using these links